4
IMPORTANT INFORMATION AND SAFETY INSTRUCTIONS
•
Installers should be qualified electricians or technicians.
•
The installation information in the manual is for information purposes only.
•
The monitoring and operation information in this manual is intended for anyone who needs to
operate the inverter.
•
The inverter output cannot be paralleled with another inverter or AC source.
•
Read the instructions carefully before installing and operating the Inverter.
•
Inverter connection and installation instructions must be followed.
•
The unit should only be opened by skilled personal.
•
To reduce risk of electric shock, disconnect all wiring before making any attempt to maintain or
to clean the unit. Turning off the INVERTER will not reduce this risk.
•
Retain the load within the rating of Inverter to prevent faults.
•
Keep the Inverter clean and dry.
•
The Inverter will not operate without batteries.
•
The Inverters should be installed indoors, in a ventilated and dry area.
•
The mounting surface should be able to support the weight of the inverter.
•
Mount the inverter vertically.
•
Do not install the Inverter on a rugged or inclined surface.
•
Do not install the Inverter near water or in a damp environment.
•
Do not install the Inverter where it would be exposed to direct sunlight.
•
Do not remove the inverter casing while the unit is powered on.
•
Keep the Inverter away from heat emitting sources.
•
Do not block the inverter ventilation openings.
•
Do not leave objects on top of the Inverter.
•
Do not expose the Inverter to any corrosive gasses.
•
Install the inverter away from any explosive gasses.
•
Ambient temperature: 0°C
– 40°C
•
AC Input and Output circuit breakers have not been provided and must be installed.
•
The INVERTER must be used with a battery supply of nominal voltage that matches the
inverter as on the “Identification Label”.
•
Sketches are intended for illustrative purposes only and are not intended to provide an
electrical design.
Do not switch the battery breaker off when the unit is operating or in any other
mode when connected to the grid.
Damage caused by reverse polarity, lightning and surges is not covered by
warranty
.
WARNING
High AC voltage present and is capable of causing severe injury.
.
