26
INVERTER OPERATION
UPS MODE
Inverter Off
UPS MODE
Inverter On
UPS MODE
Inverter Off
CALIBRATING
..PLEASE WAIT..
CALIBRATION DONE
PRESS ENTER
TURNING ON
..PLEASE WAIT..
8.4
Start-Up Procedure
Press and hold the
RED PRECHARGE BUTTON
for 3 seconds until the display shows
writing then turn on the
BATTERY
CIRCUIT BREAKER
while holding the
RED
PRECHARGE BUTTON
in.
Once the BATTERY CIRCUIT BREAKER has been turned ON, the
RED PRECHARGE
BUTTON
can be released.
Figure 8-2: Pre-Charge button position
The display will show the following:
The display then changes to
The display then changes to
Press the ENTER Button and the display will change to:
8.5
Switching the Inverter On & Off
8.5.1
Switching the
inverter “ON”
Press and hold both
and
buttons
for up to 3 seconds.
The UPS will start up and the Green LED will light up to
indicate the power is being supplied from the inverter to the load. (Yellow when no mains)
8.5.2
Switching the inverter “OFF”
Press and hold both
and
buttons
for up to
3 seconds
, the UPS will turn
OFF
after two beeps.
Battery Circuit Breaker
