Orbit II Disc Copier Reference Manual – Revision K
33
Section 8: Maintenance
The Orbit II Stand Alone Disc Copier is designed to provide years of trouble free service without routine
maintenance. The key to long life and reliable operation is to keep the work area, and the Orbit II, free of
dust and debris.
To clean the outside cabinet and plastic panel:
•
Turn off Orbit II’s external power supply.
•
Use a clean lint free cloth moistened with a weak solution of dishwashing detergent in warm water.
•
Dry the unit immediately with a clean lint free cloth.
If debris accumulates within the Orbit II Loader you should gently wipe the affected surfaces with a lint free
cloth, use a small shop vacuum, and/or blow out the contamination with compressed air. Make sure all of
your blank media, masters, and copies are protected while you are cleaning your Orbit II System.