MicroBoards Technology Orbit II Reference Manual Download | Manualshive

Page: 36 / 39

background image

Orbit II Disc Copier Reference Manual – Revision K

36

Section 11: References

11.1 Warranty

Your Microboards Technology Orbit II Stand Alone Disc Copier has a one year parts and labor warranty.
All repairs will be made at Microboards Technology’s.  The unit must be shipped in its original shipping
carton to maintain warranty coverage. Prior to shipping the unit back to Microboards Technology you must
contact the Technical Services Group for an RMA #.  This number must appear on the shipping carton to
assure proper processing. You are responsible for the shipping and insurance charges on equipment
returned for analysis or repair. After repairs are complete the Microboards Technology Technical Services
Group will contact you to let you know the unit is ready to be returned.  Microboards Technology will pay for
returning the unit to you by standard ground shipment. If you want to expedite return shipment, you can
authorize special charges when the TSG representative contacts you.

11.2 Technical Support Telephone #

To reach Microboards Technology Technical Support, please call 952-556-1639.

11.3 Regulatory Agency Approvals

This version of the Orbit II Reference Manual is intended for early production units. The Microboards
Technology Orbit II Stand Alone Disc Copier was designed to conform to applicable sections of UL, FCC,
CSA, TUV, and CE safety and EMC requirements. Formal agency approval is pending.

«
...
34
35
36
37
38
...
»

Summary of Contents for Orbit II








































Reviews:

No comments

Related manuals for Orbit II

FORTRESS CD/DVD

Brand: Spartan Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands