Orbit II Disc Copier Reference Manual – Revision K
17
5.6 Loading & Unloading CD-Rs
Loading CD-Rs
The Input Hopper is located on top of the Orbit II unit. Locate the parts identified in the photograph below
on your Orbit II Disc Copier.
Because Orbit II has a separate CD Reader, you place only blank discs in the Input Hopper for
Copy CD-
to-CD?
and
Copy & Compare?
operations. For
Compare CD?
operations the discs in the Input Hopper
will have already been recorded. Master discs are always placed in Orbit II’s CD Reader. We
recommend the use of lint free gloves whenever you handle CD-Rs, because fingerprints can affect
recording, playback, and printability. To avoid touching critical surfaces, handle CD-Rs by their inside
and outside edges.
Singulator Plate
Stepped
Guide Rod
CD-R Support
Ledge
Small diameter
Guide Rods
