Orbit II Disc Copier Reference Manual – Revision K
19
The horizontal group should never become empty while there are discs leaning against the Stepped Guide
Rod. If this happens there is a media problem. Contact Microboards Technology Technical Support for
assistance. If you are running a very large duplication job (more than 50 copies of a single master) you can
add discs, remove accepted discs, or remove rejected discs while the system is running.
Loading Masters:
You may use CDs, CD-Rs, or CD-RW discs as Masters. Masters are always placed in the CD Reader
located in the lower right hand corner of Orbit II’s Front Panel. Because Orbit II is a CD-to-CD copier,
there must always be a master in the CD Reader during copy or compare operations. When you press
Yes
at a , , or a
prompt; Orbit II’s controller will open the CD Reader for you. Load your master in the reader the same
way you would load an audio CD in a CD Player.
When you are sure the master is properly loaded in the CD Reader’s tray press
Yes
. Orbit II’s Controller
will close the Reader tray and begin the copy or compare operation you selected.
Compare? Disc-to-Disc
Copy Disc-to-Disc?
Copy & Compare?
