background image

  855-4JOETAP  

/

  (866) 327-4159  

/

  MICROMATIC.COM      JOETAP

®

 BARISTA INSTALLATION, USE & MAINTENANCE GUIDE

   

|

   27

unless such personal injury or property damage is caused 
by Micro Matic’s gross negligence, even if Micro Matic has 
been advised of the possibility of such damage or loss. Some 
states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation or exclusion 
may not apply to you.

USE OF PRODUCT

Purchaser agrees that no rights or licenses under Micro 
Matic's patents shall be implied from the sale of the Product, 
and Purchaser does not receive any right under Micro Matic's 
patent rights hereunder.  

PURCHASER HEREBY GRANTS TO MICRO MATIC A 
NONEXCLUSIVE, WORLDWIDE, UNRESTRICTED, ROYALTY-
FREE, FULLY PAID-UP LICENSE, WITH THE RIGHT TO 
GRANT AND AUTHORIZE SUB-LICENSES, UNDER ANY 
AND ALL PATENT RIGHTS IN INVENTIONS COMPRISING 
MODIFICATIONS, EXTENSIONS, OR ENHANCEMENTS 
MADE BY PURCHASER TO THE PRODUCT OR TO THE 
MANUFACTURE OR USE OF THE PRODUCT ("IMPROVEMENT 
PATENTS"), TO MAKE, HAVE MADE, USE, IMPORT, OFFER 
FOR SALE OR SELL ANY AND ALL PRODUCT; EXPLOIT ANY 
AND ALL METHODS OR PROCESSES; AND OTHERWISE 
EXPLOIT IMPROVEMENT PATENTS FOR ALL PURPOSES. 

Purchaser acknowledges that, unless otherwise indicated on 
the Product label, the Product has not received approval from 
any federal, state or local regulatory agencies.  Purchaser has 
the responsibility and hereby expressly assumes the risk to 
learn the hazards involved in using the Product.  Purchaser 
also has the duty to warn Purchaser’s customers, employees, 
agents, assigns, officers, successors and any auxiliary or 
third party personnel of any and all risks involved in using 
or handling the Product.  Purchaser agrees to comply with 
instructions furnished by Micro Matic relating to the use of 
the Product and expressly represents and warrants to Micro 
Matic that Purchaser will use the Product in accordance 
with the Product label and the instructions in this manual 
and in accordance with the practices of a reasonable person 
and all laws and regulations now and hereinafter enacted; 
and Purchaser shall not misuse the Product in any manner.  
Purchaser shall not reverse engineer, decompile, disassemble 
or modify the Product. Purchaser acknowledges that Micro 
Matic retains ownership or license rights of all patents, 
trademarks, trade secrets and other proprietary rights relating 
to or residing in the Product and Purchaser receives no rights 
to such intellectual property rights by virtue of its purchase of 
Product other than as expressly set forth herein. Purchaser 
shall have no right to use any trademarks owned or licensed 
to Micro Matic without the express written permission of Micro 
Matic.

RELEASE AND INDEMNITY

By operating this Product, the Purchaser hereby takes full 
responsibility for any risks associated with its use. Purchaser 
agrees to fully release, discharge, disclaim and renounce 
any and all claims, demands, actions, causes of action and/

or suits in law or equity, now existing or hereafter arising, 
whether known or unknown, against Micro Matic, and its 
officers, directors, employees, agents, successors and assigns 
(collectively the "Released Parties"), with respect to the use 
of the Product.  Purchaser agrees to fully protect, defend, 
and indemnify, hold harmless the Released Parties from and 
against all liability, losses, damages, costs, or expenses of 
any nature, including without limitation, reasonable attorney's 
fees, which they may at any time suffer, incur, or be required 
to pay resulting from or arising out of (i) any ordinary hazards 
that may be present in the normal operation of the Product; 
(ii) any claim of injury, illness, or death resulting from 
consuming beverages dispensed by the Product, whether or 
not prepared as specified by the Product; (iii) any hazards 
from the use or misuse of the Product; (iv) any claim that the 
Product is defective, negligently designed or manufactured 
in any manner, or otherwise determined to be the cause of 
injury or death to persons, or damage to property, or both; 
(v) any claim that the Product or the manufacture, sale, or 
labeling of the Product fails to comply with any governmental 
requirement, or the labeling on the Product, or on or within 
the packaging for the Product (including any instructions 
or warnings), is inadequate in any manner; (vi) any claim 
that the Product should have been recalled pursuant to any 
governmental requirement; (vii) Micro Matic’s negligence 
or willful misconduct in supplying the Product; or (viii) any 
injuries, losses, or damages (compensatory, direct, incidental, 
consequential or otherwise) of any kind arising in connection 
with or as a result of possession or use of the Product. 
Purchaser shall fully cooperate with the Released Parties 
in the investigation and determination of the cause of any 
accident involving the Product which results in personal injury 
or property damage and shall make available to the Released 
Parties all statements, reports, recordings and tests made by 
Purchaser or made available to Purchaser by others.  If you do 
not consent to this indemnification, you must promptly return 
the Product for a full refund prior to using the Product in any 
manner.

Authorized Service Contact:

855-4JoeTap (855-456-3827)

Serial Number_________________________________

Before calling, write down the serial number.

Summary of Contents for JOETAP JT-CTMG





























Reviews: