20
| JOETAP
®
BARISTA INSTALLATION, USE & MAINTENANCE GUIDE 855-4JOETAP
/
(866) 327-4159
/
MICROMATIC.COM
GENERAL OPERATION
• Under normal circumstances, both green switches on the face of the chiller, the water
pump button, and the product pump button should be ON.
• Use only one faucet at a time. If both faucets are opened at the same time, the nitrogen
faucet will starve for water and begin sputtering. If this occurs, close both faucets and
open one at a time until the flow is restored and they are pouring to specification.
• When operating the faucets, ensure that you pull the handle all the way down so that
it is at 90 degrees (perpendicular to the flow of coffee from the faucet and parallel to
the countertop).
• To achieve product with a rich tight head, tilt the glass slightly and pour the product down
the side of the cup. This method will prevent splattering and turbulence in the cup.
• Natural products settle/separate over time. Shake the Bag-in-Box thoroughly prior to
connecting it.
CHANGING AND ATTACHING A BAG-IN-BOX
• Acquire Bag-in-Box product and remove white cap from the fitting.
• If applicable, disconnect empty Bag-in-Box and dispose of it appropriately.
• Rinse connector using a small cup of warm water.
• Attach Bag-in-Box connector to fitting on the full Bag-in-Box.
• Place the full Bag-in-Box inside with fitting facing downwards.
• Open each faucet one at a time until flow transitions from water to finished product.
• Fill the sample stage with distilled water and press the zero button.
• Pour a full serving.
NOTE:
If the faucet has been open for at least 30 seconds, and hasn’t transitioned to finished
product, ensure the product pump button is on (illuminated amber ring) and check the Bag-
in-Box connection to make sure the fitting is attached properly. If the product pump button
is ON, the Bag-in-Box is attached properly, and the system won’t dispense finished product
after 30 more seconds of pouring water, attempt the following Bag-in-Box priming process.
• Turn water pump button OFF.
• Open either faucet until undiluted Bag-in-Box product is being dispensed.
• Turn the water pump button ON.
• Open nitro faucet, dispense 6
OZ
of liquid, and dispose of it.
• Open still faucet, dispense 6
OZ
of liquid and dispose of it.
WARNING
ELECTRIC SHOCK HAZARD
Unplug unit before servicing
or cleaning
