8
©2022 Micro-Air Corp
March 21, 2022, revision 1.0
Initial Setup Instructions
Configure your Available Outputs
EasyTouch RV 356 is meant to replace a few different OEM
thermostats and so must be configured for your system prior to using it.
Tap the Settings button on the main screen, then navigate to the Switches
button and tap it. Tap the heat pump button to enable or disable it based
on what is installed in your system. A red circle with a line through it over
the button indicates disabled. Cool and gas furnace are always enabled.
Auto Gas Changeover Enable/Disable
You can enable or disable auto gas changeover by tapping the
Enable/Disable button under the
“
Auto Gas Changeover
”
heading. When
enabled, all of your available heat modes will act in stages based on how
far the inside temperature is from the set-point. See section
in section
for more details.
Auto-Gen Start
–
Webasto (TrueAir) Systems
Some systems have hardware to allow for a generator to start prior
to a cycle occurring that needs it. The hardware for Auto Gen-Start (AGS)
is
not
part of the thermostat but it must be configured to know if it is
available.
Tap the AGS Available/Unavailable button under the
“
Auto Gen-
Start
”
heading to set it based on what you have. If set as
“A
vailable
”
then
the Generator button will appear and you can turn the functionality on or
off.
Setting this to “Unavailable” is the default and
should be used for all
non-AGS systems. See section
Warning
: You MUST configure AGS availability appropriately or your thermostat may not function as
designed. You CANNOT enable this function unless you know you have the appropriate hardware. See
section
Webasto (TrueAir) Special Considerations
if you are not sure. This can also be
found in your original thermostat’s manual.
Micro-Air cannot assist with acquiring AGS hardware.
Connecting Remotely
EasyTouch RV can be operated entirely by the touchscreen, however you
can also communicate, monitor, and modify operation of it wirelessly using the
EasyTouch RV application. Some extra features will require a wireless connection
and is described in their sections. See
Appendix A: Working Wirelessly
for details.
Settings
Switches
Heat Pump
ENABLED
Auto Gas Changeover
Enable/Disable
AGS Available/Unavailable
AGS Enable/Disable
EasyTouch RV App icon