Micom ALSTOM P341, Technical Data Sheet

Page: 36 / 62

P341 Technical Data Sheet
34
P341 Software versions 36 & 71J
Measurements list
Measurements 1
I
ϕ
Magnitude
I
ϕ
Phase Angle
Per phase (
ϕ
= A/A-1, B/B-1, C/C-1) current
measurements
IN Derived Mag
IN Derived Angle
ISen Mag
ISen Angle
I1 Magnitude
I2 Magnitude
I0 Magnitude
I
ϕ
RMS
Per phase (
ϕ
= A, B, C) RMS current
measurements
IN -2 Derived
V
ϕ
-
ϕ
Magnitude
V
ϕ
-
ϕ
Phase Angle
V
ϕ
Magnitude
V
ϕ
Phase Angle
All phase-phase and phase-neutral voltages
(
ϕ
= A, B, C).
VN Measured Mag
VN Measured Ang
VN Derived Mag
V1 Magnitude
V2 Magnitude
V0 Magnitude
V
ϕ
RMS
All phase-neutral voltages (
ϕ
= A, B, C)
.
Frequency
I1 Magnitude
I1 Angle
I2 Magnitude
I2 Angle
I0 Magnitude
I0 Angle
V1 Magnitude
V1 Angle
V2 Magnitude
V2 Angle
V0 Magnitude
V0 Angle
C/S Voltage Mag
C/S Voltage Ang
Gen-Bus Volt
Gen-Bus Angle
Slip Frequency
C/S Frequency
Measurements 2
ϕ
Phase Watts
ϕ
Phase VArs
ϕ
Phase VA
All phase segregated power measurements,
real, reactive and apparent (
ϕ
= A, B, C).
3 Phase Watts
3 Phase VArs
3 Phase VA
NPS Power S2
3Ph Power Factor
ϕ
Ph Power Factor
Independent power factor measurements for
all three phases (
ϕ
= A, B, C).
3Ph WHours Fwd
3Ph WHours Rev
3Ph VArHours Fwd
3Ph VArHours Rev
3Ph W Fix Demand
3Ph VArs Fix Dem
I
ϕ
Fixed Demand
Maximum demand currents measured on a
per phase basis (
ϕ
= A, B, C).
3Ph W Roll Dem
3Ph VArs Roll Dem
I
ϕ
Roll Demand
Maximum demand currents measured on a
per phase basis (
ϕ
= A, B, C).
3Ph W Peak Dem
3Ph VAr Peak Dem
I
ϕ
Peak Demand
Maximum demand currents measured on a
per phase basis (
ϕ
= A, B, C).
Reset Demand: No/Yes
Measurements 3
IREF Diff
A Ph Sen Watts
A Ph Sen VArs
A Phase Power Angle
Thermal Overload
Reset Thermal O/L: No/Yes
CLIO Input 1/2/3/4
df/dt
Measurements 4
Max Iac
DLR Ambient Temp
Wind Velocity
Wind Direction
Solar Radiation
Effct wind angle
Pc
Pc, natural
Pc1, forced
Pc2, forced
DLR Ampacity
DLR CurrentRatio
Dyn Conduct Temp
Steady Conduct T
Time Constant