the remote control to go back to the Network Settings screen.
The Wi-Fi settings will be remembered and used each time the player turns on. Up to three
connection settings can be stored although the first one will always be used by default. The
other two setting memory slots are useful if the player will sometimes be used at a different
location.
To delete Wi-Fi settings, reset the player to factory default through the System Settings menu.
8.4.3 PPPoE Setup
If the player is connected directly to a PPPoE connection, such as DSL modem, the player can
be configured with the PPPoE user name and password.
Setting
Description
Wired or Wireless
Select which connection should the player attempt to access the PPPoE
network.
User ID
Enter the PPPoE user name using the remote control and the on-screen
keyboard
Password
Enter the PPPoE password using the remote control and the on-screen
keyboard
8.4.4 FTP Server
This setting controls whether the vsFTP server of the player runs. An internal hard disk drive
must be installed to use this feature. Turn this setting on only when FTP will be used. Turn it off
when finished to reduce processor load. This function is for expert users only and can potentially
corrupt the player’s firmware if used incorrectly, requiring a firmware re-flash in recovery mode.
The FTP connection parameters are as follows:
HOST: IP address of the player
USER: root
PASSWORD: 123
8.4.5 Transmission BT Service
This setting controls whether the Transmission BitTorrent service of the player runs. An internal
hard disk drive must be installed to use this feature. Turn this setting on only when it will be
used. Turn it off when finished to reduce processor load. This function is for expert users only.
The web access address of the Transmission service is the IP address of the player and port
9091 (e.g. http://192.168.1.127:9091).
To learn more about Transmission, visit http://www.transmissionbt.com.
8.4.6 BT Process
This setting controls the default BitTorrent service of the player. This default BT service is
depreciated in favor of Transmission. An internal hard disk drive must be installed to use this
feature. Turn this setting on only when it will be used. Turn it off when finished to reduce
