Mi STYTJ01ZHM, User Manual

Page: 7 / 95

Routine Maintenance
Dust Bin and Filter
Note: Weekly cleaning is recommended.
1. Open the vacuum-mop cover, then pinch the bin clips to remove the
dust bin.
Cleaning the Washable Filter
Note: Biweekly cleaning is recommended.
1. Open the bin cover at the positions marked with arrows.
Note: Only clean water should be used to clean the filter. Do not use detergent.
Do not attempt to clean the filter with a brush or finger.
2. Add clean water to the dust bin, and close the bin cover, then shake
the bin back and forth, finally pour out the water. Repeat these steps
until the filter is clean.
2. Open the bin cover as indicated by the diagram.
Using the Brush Cleaning Tool
Main Brush Guard
Clips
Main Brush
Main Brush
Bearings
＞0.5m
＞1.5m
＞0.5m
Note: Do not place the charging dock in an area with direct sunlight or where other objects could
block its signaling area, as this may hinder the vacuum-mop from returning to the charging dock.
Charging Dock
Place the charging dock on the level ground against a wall. Before
plugging the charging dock into a power outlet, make sure there is a
distance of 0.5 meters or more on either side of the charging dock. To
ensure you can well connect to the vacuum-mop with your phone,
make sure the vacuum-mop and charging dock are in the range of
Wi-Fi.
Main Brush
1. Flip the vacuum-mop over and pinch the clips to remove the main
brush guard.
2. Lift the main brush out of the vacuum-mop, then clean the brush
bearings.
3. Use the included brush cleaning tool to remove any hairs tangled on
the brush.
4. Reinsert the main brush, then put the guard back on and press on it
until the clips lock into place.
Note: It is recommended to clean the main brush weekly and replaced
every 6 to 12 months.
11 12