Mod. IC
Version 01
Page 9-34
The system is set out of function by the emergency exit button (5). Restarting the system
is only possible if the emergency exit button is unlocked. After unlocking the emergency
button and pushing the button with the arrow symbol of the keyboard the grab will open
and return to the starting position. The rest of the material then has to be removed
manually. The latest versions of these machines move the grab forward after unlocking the
emergency exit button and then they eject the rest before the system returns to its start
position.
The stop button (4) at the display of the machine (see 4.3) enables the operator to stop
operation at any time of the cutting process. Starting the machine once again is only
possible when the grab has returned to its starting position and the remaining pieces have
been removed.
The stop button (6) at the control keyboard for the forward feed conveyor belt was applied
for the interruption of the automatic cutting process. The machine will stop in this case
after the completion of the running cutting process. Latest versions have got a single
button for the STOP and START function without a LED display.
Locking cutting area (7)
The cutting area is protected against forbidden opening by a coded security switch.
2.4 DAILY SAFETY INSPECTIONS
Before taking the machine in production the following safety functions are to be inspected
daily for defective behaviour and functional capability. Please take care about the
regulation of VGB 77.
The corresponding work will be described and demonstrated by installation of the new
machine (see ch. 5.1)
7