Mod. IC
Version 01
Page 5-34
Model
IC 410 – 21
IC 610 - 21
IC 700 – 21
IC 700 – 25
IC 1050 – 21
1.5 COPYRIGHT
The description remains in all details property of MHS Schneidetechnik GmbH. Copies
also in detail needs a permission of us.
2.
SAFETY AND SAFETY INSTALLATIONS
2.1 EXPLANATIONS OF SYMBOLS AND INSTRUCTIONS
The Danger! Symbol is used in this Operation and Maintenance
Manual to warn the user in situations where high danger to life and
limb exist. Pay utmost attention to these instructions and work with
particular care in these cases. Pass on all work safety instructions to
other users.
Only authorized electricians are allowed to carry out work on the
electrical control and switching units or on any other electrical parts
of the machine. All safety elements must be tested for complete
functionality upon completion of the maintenance or service. Only
after fulfilling these requirements can the worker be released for
production use.
ATTENTION!
This manual uses “ATTENTION!” to bring particular attention to
situations in which the guidelines, regulations, directions, and work
procedures are to be strictly observed in order to prevent damage or
destruction of the Slicing and Portioning Machine and components.
HINWEIS!
“IMPORTANT” pertains to special information regarding the
economical use of the Slicing and Portioning Machine or to
particular technical requirements the user must regard.