Mod. IC
Version 01
Page 21-34
5.4.1
Programme 0
Any input in this stage won`t be stored. Test cuts can be executed with the cut-off
programme.
5.4.2
Programme 1 to 25
“5 section program”
The operator is able to cut one piece of meat or similar into max. 5 different sections with
having a different slice thickness of each section.
Procedure:
Select one program from 1 to 25 and push MEMORY button.
The first page will be shown. Please enter slice thickness and number of slices:
Programme example: 1
st
page display
- 1. Section:
1 Schnitt mit 25,0 mm
- 2. Section:
Slices with 18,0 mm
no. of slices is calculated
- 3. Section:
1 Slice with 25,0 mm
The section 4 and 5 are cancelled.
ATTENTION!
Only one field could be entered with „0“ for calculation purposes of
either slice thickness or quantity. ( a.m. example: The quantity of the
slices with 18,0 mm will automatically calculated). The length for
calculation is the total length of the product. Alternatively the slice
thickness could be calculated.
After entering of slice thickness and quantity the data are confirmed by the Memory button.
The 2nd page of the menu will appear:
Programme examplel: 2
nd
page display
- Blade speed,
- Conveyor speed,
- Run off time conveyor belt
By depressing the Memory button the programme the last page will appear: