MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | [email protected] | www.mgenergysystems.eu
Innovation
in energy storage
Battery module spacing requirements
Figure 9 shows the minimum spacing of the battery modules. It is required to maintain a clearance of 10 mm
from all sides of the battery module.
Figure 9 - Battery spacing requirements
Placement in sealed spaces or compartments
It is recommended to place the battery modules in some kind of box or sealed compartment. This protects
the battery modules against water ingress and moisture. A lid or hatch above the battery modules can
collect water from condensation that could drip onto the battery. This can damage the battery and therefore
must be prevented at all times. A solution to this is to isolate the lid or hatch with a foam.
It is also recommended to place the battery module 10 mm from the bottom of the box or any floor. This
creates some margin with water ingress from the bottom up or condensation.
NOTICE:
Respect the thermal management notes of the battery module in chapter 7.2.2
when used in sealed spaces or compartments.
