MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | [email protected] | www.mgenergysystems.eu
Innovation
in energy storage
6
OVERVIEW
This chapter shows an overview of the LFP battery.
Each battery module contains the following common parts:
Negative battery pole connection;
Positive battery pole connection;
BMS CAN-bus connection, either RJ45 or M12;
Status LEDs;
6.1
Connection overview
Figure 5 – LFP 280 Ah module overview
Table 6 - Module connection overview
Part
Description
A
Positive power connection (including fuse). M8 bolt connection.
B
Equipotential bonding connection (only available on the (M12, HV) option).
C
CAN-Bus communication, either RJ45 or M12.
D
Negative power connection. M8 bolt connection.
