Meyra 1.155, Operating Manual

Page: 16 / 40

2
1
3
4
16
Removing the back support upholstery
For removal, first pull off the rear part of the
back support upholstery (1), then fold it over
to the front and pull it off of the adjustable
back strap (3).
Placing the back support upholstery
For placing the back support upholstery (1),
lay it centred around the upper velcro straps
(2) and attach it to the adjustable back strap
with the velcro fasteners (3).
☞
For a soft upper edge you should leave
a little space between the upper span-
ning belt (2) and the folded back sup-
port upholstery (1).
☞
When the user leans against the back
support upholstery (1) again, pay atten-
tion that:
☞
The pressure of the back must be
spread evenly throughout the back
support upholstery.
☞
A complete hand should fit in between
the cushion and back at the upper
edge of the back support upholstery.
☞
The head of the user must be held in
balance through the adjustment of the
spanning straps.
The extended parts of the back support are
fastened to the top or bottom seat surface
depending on the adjusted back support
height [4].