Meyra 1.155, Operating Manual

Page: 20 / 40

1
20
RETAINING STRAP
Make sure that no objects are trapped
between belt and the body!
The retaining strap is not part of the retai-
ning system for the wheelchair and/or the
driver during transport in motor vehicles.
The retaining strap [1] is screwed from the
back onto the respective back support tube.
The retaining strap serves to stabilise the
sitting position and prevents falling forward
out of the wheelchair.
To fasten the retaining strap, pull both ends
forward and audibly let the buckle click into
place. To open the retaining strap press in
both clips and pull the ends of the straps
apart.
☞
The retaining straps can be adjusted in
length and should not be pulled too
tight.
BRACKETS
☞
The wheelchair does not feature sepa-
rate brackets for bags or rucksacks.