Meyra 1.155, Operating Manual

Page: 14 / 40

1
2
3
14
BACK SUPPORT
Adjustment of the back support
angle
First pull or press the rope (3) in the midd-
le in order to adjust the angle of the back
support. Then swivel the back support into
the next possible latching position [1]. – The
pressure bolt must audibly lock into place.
☞
Check the engagement of the back
support with a quick jerk.
☞
The greasing of the thrust bolts is re-
commended for an easier latching of
the backrest.
Folding over the back support
The back support [1] can be folded down
for storage or transport [2].
Then unlock the back support by pulling
or pressing the rope (3) and fold it onto the
seat [2] until the pressure bolt of the rope
audibly locks into place.
☞
Check the engagement of the back
support with a quick jerk.
Folding up the back support
First pull or press the rope (3) in the midd-
le in order to raise the back support. Then
pull the back support up as far as possible
[1]. – The pressure bolt must audibly lock
into place.
☞
Check the engagement of the back
support with a quick jerk.
☞
The greasing of the thrust bolts is re-
commended for an easier latching of
the backrest.