background image

28   

WHEN

WHAT

REMARK

Before starting out

Check the back tubes 
and frame tubes for 
damages

Carry out the test yourself 
or by a helper. 
If deformations or cracks 
occur in the welding 
seams, contact a specialist 
workshop immediately for 
repairs. – Danger of acci-
dent!

Especially before driving in 
the dark
(when applicable)

Check the lighting

Check the light- and indi-
cator signal equipment as 
well as reflectors for imma-
culate performance.

Carry out test yourself or 
with a helper.

Every 8 weeks

(depending on frequency 
of use)

Lubricate the fol-
lowing components 
with a few drops of oil

 

Moving parts of the lo-
cking mechanism.

 

Brake lever bearings.

Do it yourself or with the 
aid of a helper.
Components must be free 
from used oil residues be-
fore lubrication.
Please ensure that excess 
oil does not contaminate 
the environment (e.g. your 
clothing).

Every 8 weeks

(depending on frequency 
of use)

Check all screw con-
nections for secure fit

Carry out test yourself or 
with a helper.

Every 6 months

(depending on frequency 
of use)

Check

 

Cleanness.

 

General condition.

See Care.
See Repairs.

Manufacturer recom-
mendation:

Every 12 months
(depending on frequency 
of use)

Safety inspection

 

Vehicle

To be carried out by the 
specialist dealer.

Summary of Contents for 1.155









































Reviews: