1
2
18
WHEELS
Drive wheels
After inserting the drive wheel the locking
button (2) must stick a couple of millimet-
res out of the wheel nut.
The drive wheels are supported on a quick
release axle [1] and can be removed resp. at-
tached without tools.
First press the locking button (2) of the
quick release axle in the center of the hub.
Afterwards remove or attach the drive
wheel.
☞
The air pressure value for the tyres of
the wheelchair can be read in the
on page 29 or details on
both sides of the tyre cover.
☞
If the drive wheels has too much side-
ward lag or the quick release axle does
not engage, contact your specialist
dealer immediately for repair.
☞
No person may be seated in the
wheelchair during assembly or remo-
val. The wheelchair should stand on a
level and firm surface. Before starting
the disassembly work, support the
frame to prevent the wheelchair from
tipping over and secure it to prevent an
unwanted movement or tipping over.
Summary of Contents for 1.155
Page 1: ...en Operating manual W e m o v e p e o p l e Adaptive wheelchair Model 1 155...
Page 2: ...2...
Page 38: ...38 NOTES...
Page 39: ...39 NOTES...
