Meyer EZ-Mount Plus, Operation And Maintenance Manual

Page: 30 / 36

Ice Hawk
This innovative configuration comes complete
with its own, built-in hydraulics system! This
self-contained v-box spreader unit can be
initially installed in 2-3 hours and re-installs in
only 30 minutes, literally providing plug-n-go
installation. Plus, the Ice Hawk eliminates both
the need to install costly hydraulic systems in
each truck and the common shortcomings of
engine driven vboxspreaders, while providing
unsurpassed spreader performance. Thus
allowing you to spend more time on the road
- and less time in the maintenance garage.
-28-
Insert Hopper Spreaders
1.8 cu. yd. Carbon Steel (62991),1.8
cu. yd. Stainless Steel (63006),2.0
cu. yd. Carbon Steel (62992),2.0 cu.
yd. Stainles Steel (63007)
The Meyer 1.8 & 2.0 cubic yard ca-
pacityV-box spreader for pickup trucks
mountsand stores as a single unit. This
mechanically-operated spreader is
powered by an electric start 10 H.P.
gas engine, which drives a high torque
orbital-type motor and a 20:1 ratio gearbox.
Spinner and drag chain speeds work in
unison with engine R.P.M. The spinner will
evenly spread material from four (4) to thirty
(30) feet. In-cab controls make operation
easy.
STCC
The Tailgate Cross Conveyor (TCC) provides for the most efficient method
of distributing granular materials available today. This sturdy cross conveyor
will perform dozens of jobs while saving on labor, time and materials. Every
municipality,contractor, utility and construction company can benefit from the
TCC cost efficient material handler. The cross conveyor transfers material left
or right allowing for multiple uses. The TCC mounts directly to dump box with
quick disconnect pins. Unit mounting allows for dumping over or parallel-to-
ground positioning. Conveys most free flowing material.
PolyHawk
This one-piece polyethylene hopper fits most 3/4 ton pickup truck beds and
provides all the robust performance qualities of conventional V-box spreaders,
but with less weight, greater capacity, longer life and less maintenance. The
PolyHawk holds 37% more material than competitive poly spreaders. Another
key feature of the PolyHawk™ is the swing-up spinner assembly. The swing
up spinner allows for simplified clean-up and easy seasonal storage. The Poly
Hawk is equipped with a top screen and a 16” wide stainless steel conveyor
that provides reliable material handling control and has a replaceable stainless
steel conveyor floor. Overlapping baffles, 2 internal and 4 external, and a 13”
poly spinner disc provide precise material spreading. A 10 HP 4-cycle engine
is standard and an 11 HP 4-cycle is available as an option.