Meyer EZ-Mount Plus, Operation And Maintenance Manual

Page: 29 / 36

Under Tailgate Spreader
An extremely rugged truck accessory, the
Under-Tailgate Spreader is offered in two
models: a single auger or for ultimate
efficiency dual augers; each spreads
cinders, sand, salt or pea gravel. Attaches
easily under the tailgate of any standard
dump truck, yet will not obstruct dump-
ing over the spreader. The spinner is
always in spreading position and can be
operated with the truck moving backward
or forward. Also available in stainless
steel and direct drive.
Mate XL (38000)
The Meyer Mate XL spreader holds
9 cubic feet of salt, sand or calcium
chloride and it can even spread seed
to extend its use beyond the snow
season. The Mate XL features a thermo-
plastic no-steel frame for long-lasting
protection from corrosion. The Mate
XL is powered from a 1/6thH.P. 12VDC
motor with in-cab variable speed
control which will spread material up
to 30’. A vibrator is standard on the
XL model. The Mate XL requires NO
drilling and is quickly attached and de-
tached from any full size pick-up truck.
Adjustable controls allow spreading of
bagged#1 rock salt from 3 to 30 feet.
-27-
Visit www.meyerproducts.com for more information
Replaceable Tailgate Spreader
This replaceable tailgate spreadermounts easily on most
one-tondump bodies by simply replacing theexisting tailgate. De-
signed to spreadfree-flowing chemicals, salt and/orsand through-
out its entire width, thereplaceable tailgate spreader canspread in
widths from 4’ to 40’. Ahost of optional equipment allowsyou to
customize the spreader to fitmost any job requirement.
MDV Spreader
9’ Carbon Steel (63001)
9’ Stainless Steel (63004)
10’ Carbon Steel (63002)
10’ Stainless Steel (63005)
The MDV spreader expands your choice
between pickup size spreaders and the
large V-box units. The MDV bridges the gap
between the 15,000 GVW and the 20,000
GVW trucks. It can be powered by either
your truck’s central hydraulic system or its
own power source.