Meyer EZ-Mount Plus, Operation And Maintenance Manual

Page: 12 / 36

SNOW PLOW STORAGE
1.
When snow plow is disconnected, disconnect lift chains
from lift arm and extend lift cylinder to end of stroke and
coat chrome rod with light grease.
This fills the cylinder with
hydraulic fluid and protects the interior and exterior from rust
and corrosion.
2. Whenever Moldboard is disconnected, coat the exposed
portions of the power angling cylinder chrome rods with light
grease to protect them from corrosion.
3.
Coat pivot pin and other wear points with chassis lubricant.
Be sure to grease all grease holes.
4. Unplug electical connection at power unit. Coat connection
with a dielectric compound to prevent corrosion and plug into
their corresponding weather plug.
5.
Reference post season summer maintenance on page 9 prior
to final storage.
-10-