Meva MevaLite, Technical Instruction Manual, Page: 22 / 88

ML-22
MevaLite
Stripping Corners - Lever Tool
Stripping the corner:
To strip the corners, remove
the wedge from the top corner
(Fig. 22.1 and 22.2).
Apply the lever tool to the top of
the corner and place the pin of the
tool into the corner plate.
With the pin attached to the
plate, push up the bar to slide the
mechanism up the corner so that
it pulls the corners' side profiles
inward (Fig. 22.3, and 22.4).
Once the inner mechanism of
the corner is pulled all the way
to the top, the stripping corner
is retracted and is in its stripped
position (Fig. 22.5).
Description Ref.-No.
ML-stripping corners
9’............................................... 22-508-00
6’............................................... 22-508-10
4’............................................... 22-508-20
Stripping corner lever tool 2-500-2250980
EA-assembly lock ....................... 29-205-50
Uni-assembly lock 22 ................. 29-400-85
D
Zeichnung Nr. 100501_0127
Stand: 08.08.2019/bhe
_öffnen_Schritt_1-A
C
E
Zeichnung Nr. 100501_0127
Stand: 08.08.2019/bhe
_ ö ffnen_Schritt_1-B
B
Zeichnung Nr. 100501_0127
Stand: 08.08.2019/bhe
_ ö ffnen_Schritt_2
Fig. 22.1 Fig. 22.2
Fig. 22.3
Fig. 22.4
Fig. 22.5
Wall formwork
Technical Instruction Manual / June 2022