Meva MevaLite, Technical Instruction Manual, Page: 18 / 88

ML-18
MevaLite
Articulated Corners
Acute and obtuse angled corners
are formed using MevaLite
articulated inside and outside
corners. Steel rails are attached
to the multi-function profile with
flange screws at each tie hole
elevation (Fig. 18.1 & 18.2). The
rails at the outside corner must
be attached to the panels with at
least two flange screws each, one
in the panel next to the AOC and
one in the adjacent panel. These
rails must also be bolted together
at their intersection with a flange
screw 18 and flange nut 100.
Flange screws shall be tightened
by turning with a hammer claw or
bar until snug, followed by a few
hammer blows.
If wood fillers are needed, the
panel profiles are connected using
Uni-assembly locks.
Side length of articulated outside
corner: 5”
Side length of articulated inside
corner: 1’
Adjustment range: 70º to 220º
(Fig. 18.1-18.3).
Description Ref.-No.
ML-articulated inside corners
9’............................................... 22-506-10
6’............................................... 22-506-20
4’............................................... 22-506-30
3’............................................... 22-506-40
ML-articulated outside corners
9’ 22-506-60
6’............................................... 22-506-70
4’............................................... 22-506-80
3’............................................... 22-506-90
EA-assembly lock ....................... 29-205-50
Uni-assembly lock 22 ................. 29-400-85
Fig. 18.1
Fig. 18.2
AIC
AOC
Wood blocking
Wood filler with
Uni-assembly lock 28
Steel rail
Bolted with flange
screw 18 and flange
nut 100 to provide
rigidity
AIC
AOC
RAIL
RAIL
RAIL
RAIL
RAIL
Note:
See the "90° Corners"
section for lock
requirements at
outside corners
Wall formwork
Technical Instruction Manual / June 2022