102
ķ
the display. The possible correction values range from 1/3 to 3 apertures in
one-third aperture increments.
Setting procedure:
• Press the „SEL“ button repeatedly until „Select“ appears on the display.
• Select the menu option „FB“ by pressing the UP
and DOWN
buttons.
The selected menu option will be highlighted.
• Confirm the selection of the special function by pressing the „Set“ button.
• Select the desired setting with the UP
and DOWN
buttons. The set-
ting takes effect immediately.
• Press the „Return“ button
repeatedly until the screen is reset to its nor-
mal view. If the „Return“ button
is not pressed, the display is automati-
cally reset to its normal view after about 5 seconds.
When „FB 0“ is displayed, the flash bracketing series is deactivated.
• The first shot is taken without a correction value. „FB 1“ will also appear on
the display.
• The second shot is taken with minus correction. „FB 2“ and the minus cor-
rection value (EV) will also appear on the display.
• The third shot is taken with plus correction. „FB 3“ and the plus correction
value (EV) will also appear on the display.
• After the third shot, the flash bracketing series is automatically deleted.
„FB“ will disappear from the display.
When the flash bracketing series is set, the correction value is always
shown as a positive value!
Flash bracketing series in the TTL flash mode
A flash bracketing series in the TTL flash mode is only possible if the camera
supports the setting of a manual flash exposure correction on the flash unit
(see camera instruction manual)! Otherwise, the shots are taken without a
correction value!
☞
Flash bracketing in automatic flash mode A
The type of camera is not important for a flash bracketing series in automatic
flash mode A.
7.4 Extended Zoom Mode (Zoom Ext)
In the extended zoom mode, the focal length of the main reflector is reduced
to one level below the focal length of the camera lens. The resulting broader
light coverage provides additional dispersed light (reflections) inside rooms
so that a softer flash illumination is possible.
Example:
The focal length of the camera lens is 50 mm. The extended zoom mode sets
a 35 mm reflector position on the flash unit. However, 50 mm continues to be
shown on the display.
• When „Ext ON“ is displayed, the extended zoom mode is activated.
• When „Ext OFF“ is displayed, the extended zoom mode is deactivated.
Setting procedure:
• Press the „SEL“ button repeatedly until „Select“ appears on the display.
• Select the menu option „ZoomExt“ by pressing the UP
and DOWN
buttons. The selected menu option will be highlighted.
• Confirm the selection of the special function by pressing the „Set“ button.
• Select the desired setting with the UP
and DOWN
buttons. The set-
ting takes effect immediately.
• Press the „Return“ button
repeatedly until the screen is reset to its nor-
mal view. If the „Return“ button
is not pressed, the display is automati-
cally reset to its normal view after about 5 seconds.
Once the extended zoom mode is activated, „E-Zoom“ will appear on the
display next to the focal length.
Depending on the system, the extended zoom mode is supported for
lens focal lengths of 28 mm or more (35mm format). The camera must
be equipped with a CPU lens and be able to transfer data on the lens
focal length to the flash unit.
☞
706 47 0029-A3 58 AF-1 N 30.05.2007 8:05 Uhr Seite 102
