Metz Clarea, Operating Instructions Manual

Page: 9 / 132

4 Connecting, switching on and off
Power connection
Connect the TV set to the wall socket with the accompanying
power cord.
Antenna connection (back of unit on the bottom)
Connect the TV to the antenna box with an antenna cable.
Switching on for the first time
Switch on the TV set with the power switch on the device.
The orange or blue-red stand-by display is illuminated.
When the TV set is switched on for the first time, the
"Installation Wizard" appears. It guides you through the
settings that you have to make to start-up the TV set if
the settings have not been done by the dealer. This
includes the language, country, reception type and so on
(see chapter 6).
Switching on
Switch on the TV set with the power switch on the device.
The orange or blue-red stand-by display is illuminated.
After about 10 seconds the TV set switches automatically to
program position 1 or the preset initial program position,
see Chap. 21.
If no other command is received from the remote control,
a message will appear after approx. 10 minutes asking for one of
the remote control keys to be pressed. Unless a button is pressed
on the remote control, the TV will switch to stand-by mode after
10 minutes.
Power connection,
back,
DVB-S2 DVB-C/-T
Antenna connection
+
Power switch
Solea: power switch
back right.
9