manualshive.com logo in svg

Metz Axio pro, Operating Instructions Manual

Share
Download
Metz Axio pro Operating Instructions Manual Download Page 51

51

12.7 Connecting Headphones

For the 

Axio pro, Linus

and 

Sirius

, the

headphones connector is located behind
a flap. See page 115. Press ••• to open
the flap. 

The headphones connector is located
behind a flap on the left side for the

Axio pro

and 

Linea

. See page 115.

Press I I I in order to open the flap.
The headphones connector is located
behind a flap on the right side of the Pri-
mus. See page 115.

Radio headphones can also be connec-
ted to the AUDIO OUT sockets on the
back of the TV set. Also see page 116.

The sound settings for the radio head-
phones should then be set as described
on page 50.

We recommend headphones with impe-
dance that is not less than 32 Ohm.
For headphones with less impedance
(approx. 8 Ohm), the dynamic range is
smaller.
The headphones volume can be saved as
a default value (see Chapter 12.)

Setting the volume too high
when using headphones or ear-
phones can result in damage to
the ears - including the complete
loss of hearing.

When receiving a dual-language pro-
gram, you can switch between the two
sound channels.

In TV mode, press and hold the yellow
key 

until the sound function “Sound

mode“ is selected.

Then use the 

V-/V+

key to select Sound

1 or Sound 2.

12.8 Sound 1, Sound 2

Headphone volume

Headphone

Ton 2

Headphone volume

Sound via

Sound mode Ton 2

Balance 

Summary of Contents for Axio pro





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands