manualshive.com logo in svg

Metz Axio pro, Operating Instructions Manual

Share
Download
Metz Axio pro Operating Instructions Manual Download Page 136

136

Problem

Possible cause

Remedy

TV set does not react
to commands from
the remote control

• No line of sight between the

remote control and the TV set.

• Sunlight is shining directly on

the infrared window of the TV
set.

• Batteries of the remote control

are exhausted.

• TV set has been switched off

with the main power switch.

• Fault in the internal processor.

• Remove any obstacles

between the units.

• Prevent sunlight from

shining on the set.

• Replace the batteries.
• Switch on the TV set

with the main power

switch.

• Switch off the TV set

with the main power

switch, wait a few

seconds and then switch

it on again.

No sound is output
on the TV speakers

•  “Speaker off” or “Speaker

centre“ is set in the “Configu-
ration” – “Operation” –
“Sound settings” TV menu.

• In the “Configuration” –

“Operating” – “Sound
settings” TV menu, set
“Speakers on”

35. Problem, Possible cause, Remedy

The message “Enter
code“ is displayed
when the TV set is
switched on.

• The childlock is active and was

programmed to disable all
stations.

• Enter the code you used

when programming the
childlock.

The TV set will not
switch to a selected
program position. A
teddy bear is dis-
played instead.

• The childlock is active and was

programmed so that only the
stations shown in the list beside
the teddy bear may be selec-
ted.

• Enter the code you used

when programming the
childlock.

• EPG data are currently being

collected from the programmed
EPG station.

• None. When all data

have been collected, the
TV set will switch itself
off automatically.

You have switched
off the TV set with
the 

key, but the

green LED remains
on.

Summary of Contents for Axio pro





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands