EWIO
2
User Manual
V 1.1 | Stand 10/2020
Seite 70 von 96
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Germany
Tel. +49 7702 533-0 | Fax +49 7702 533-433
For additional documentations look at www.metz-connect.com
The name of the measuring point must be entered in the input field. This name will later be
used in the overviews to identify the meters.
Additional information can be entered optionally:
The trade electrical, water or heat can be selected in the pop-up menu.
In the other input fields you can enter the following information: meter manufacturer,
installation location, meter number, cost center, comment, client and customer number.
Clicking the "Metering Code (optional)" action field opens and closes the entries required for
the code.
The Metering Code is a worldwide unique identification of a measuring point. It is used for
unique identification in large networks and is composed of different components:
Country - e.g. DE for Germany (2 letters)
Operator - Network operator identification (6 digits)
Postal code - Zip code (5 digits)
Measuring point ID - Counting point number (20 alphanumeric characters)
Clicking the "Next" action field opens the window for the MBus and Modbus meters to select
and configure the data points of the meter.
For system counters, an analog or digital input must first be selected as a data point in the
pop-up menu by clicking on the "Add data point" action field.
