14
7 SG9H 70 en
4.3
Configuration menu
The local user interface is organised in a menu structure. To
enter the menus press
+
and
-
simultaneously in the
measurement monitoring view panel. To move to the next
or previous selection by pressing
+
or
-
accordingly.
4.4
MODE menu
If the user wants to change the valve operating mode, press
the
?
key at the
MODE
selection. The mode will start to
flash and by pressing
+
or
-
you may alter the operation
mode selection. User accepts the current selection by press-
ing the
?
key.
There are two options for the operating mode.
4.4.1 AUTO
During the
AUTO
mode, the controller controls the valve
position according to the incoming setpoint signal from the
4–20 mA signal source. This mode is used during the nor-
mal process control service.
Fig. 10
Guided start-up
NOTE:
You may cancel any action by pressing the
=
button.
Cancelling of operation returns user interface view one
level up in menu hierarchy.
— brief push
Fig. 11
Configuration
— brief push
