METRON QA-1290, User & Service Manual, Page: 19 / 65

•
Press Establishment (F5) . Use the alphanumeric keys to en-
ter the test facility’s name or other identifying data. Press En-
ter to save.
•
Press MORE (F1) to advance to Setup Screen 2.
•
Press STORE (F2) to store all settings in QA-1290’s flash
memory.
Language: English .............> F7
Date : XX. XXXXXXX XXXX ..........> F6
Time : XX:XX:XX (HH:MM:SS) ......> F5
MORE STORE AM/PM MAIN MENU
F1 F2 F3 F4
Setup Screen 2 . This screen (above) contains the following settings:
•
Language (F7) . This is installed with METRON’s Firmware
version. No selection.
•
Press Date (F6). Use the alphanumeric keys to set, or reset,
the system date (DD/MM/YYYY). Press Enter to save.
•
Press Time (F5). Use the alphanumeric keys to set, or reset,
the system clock (HH:MM:SS). Press F3 to specify the a 12-
hour ( Am/Pm ) or 24-hour ( 24 hour ) clock. Note: When 24
Hour shows above F3 , the system is operating on a 12-hour
time schedule. When showing “ Am/Pm ” above F3 , the sys-
tem is operating on a 24-hour time schedule.
•
Press MORE (F1) to advance to Setup Screen 3.
•
Press STORE (F2) to store all settings in QA-1290’s flash
memory.
QA-1290 Serial no : XXXXX.............> F7
Report page length : 58 ..............> F6
FIRMWARE Version : X.XX F5
MORE GO BACK MAIN MENU
F1 F2 F3 F4
Setup Screen 3 . This screen (above) contains the following settings:
•
Press QA-1290 Serial no. (F7) . Use the alphanumeric keys
to enter the QA-1290’s serial number. Press Enter to save.
•
Press Report Page Length (F6). Use the alphanumeric keys
to set the length of the printed report.. The range is 10 to 999.
Press
Enter to save.
3-5