16
S
CALE
C
ONFIGURATION
B
AR
C
ODES
Dual Cable Scale Configuration Bar Codes
Scale Protocols
The following bar codes will change
scale
parameters intended for a
Dual Cable
environment. To place the
scanner
in
Dual Cable
mode,
please refer to page 24.
If the MS2
xx
0 is currently in a
Dual Cable
configuration, temporarily
disconnect the
Scale to Host cable
prior to configuring the scale.
The MS2
xx
0
does not
need to be in scale service mode.
The
Scale Save Data
bar code
must
be scanned last to save the
changed configuration (see page 2).
*
NCI = 4 Status Bytes
³
9
9
6
0
5
2
Set the number of status bytes reported by
the NCI scale protocol to 4 status bytes.
* Factory Default Setting
NCI = 2 Status Bytes
³
9
9
6
0
5
3
Set the number of status bytes reported by
the NCI scale protocol to 2 status bytes.
