6
S
CALE
C
ONFIGURATION
B
AR
C
ODES
Single or Dual Cable Scale Configuration Bar Codes
Pole Display Configuration
The following bar codes can be used to configure a
Single or
Dual Cable
MS2
xx
0.
If the MS2
xx
0 is currently in a
Dual Cable
configuration, temporarily
disconnect the
Scale to Host cable
prior to configuring the scale.
The MS2
xx
0
does not
need to be in scale service mode.
The
Scale Save Data
bar code
must
be scanned last to save the
changed configuration (see page 2).
Scale Has No Display
³
9
9
6
0
0
4
Set the scale to
not require
a remote
display. All weights are expected on a POS
terminal display.
A remote display
can not
be plugged into
the
Scale to Display
connector on the
MS2
xx
0 (
see Figure 1
).
