62
S
CANNER
C
ONFIGURATION
B
AR
C
ODES
Auxiliary Port
Quick Start for a Secondary Metrologic Scanner
The following codes
do not
require that the MS2
xx
0 to be in scale
service mode.
S
TEP
1
Use the
Stratos
to scan the following bar code. This bar code will configure
the Stratos’ auxiliary port to accept a Metrologic scanner as the secondary
scanner.
Enable Stratos Auxiliary Port
³
4
3
7
3
2
0
The auxiliary input port’s data format must match the main output format
of the secondary scanner
S
TEP
2
Configure the secondary scanner to match the auxiliary port’s data format.
Use the
Secondary Scanner
to scan the following bar codes in the order
shown.
Enter Configuration Mode
³
9
9
9
9
9
9
Enable Auxiliary Output
³
1
2
4
8
1
7
