5
S
CALE
C
ONFIGURATION
B
AR
C
ODES
Single or Dual Cable Scale Configuration Bar Codes
Pole Display Configuration
The following bar codes can be used to configure a
Single or
Dual Cable
MS2
xx
0.
If the MS2
xx
0 is currently in a
Dual Cable
configuration, temporarily
disconnect the
Scale to Host cable
prior to configuring the scale.
The MS2
xx
0
does not
need to be in scale service mode.
The
Scale Save Data
bar code
must
be scanned last to save the
changed configuration (see page 2).
Scale Display
Single-Line Weight Only
³
9
9
6
0
0
3
Set the scale to
use
a single-line weight only
display to show all scale activity.
The single-line display
must
be plugged into
the
Scale to Display
connector on the
MS2
xx
0 (
see Figure 1
).
Figure 1. Location of Scale to Display Connector
Scale Display
4-line Price Computing
³
9
9
6
0
0
9
Set the scale to
use
a 4-line price computing
display to show all scale activity.
The 4-line display
must
be plugged into the
Scale to Display
connector on the MS2
xx
0
(
see Figure 1
).
