Metrologic Stratos MS2x20 Series Page 53 Configuration Addendum Download

Page: 53 / 92

CANNER

ONFIGURATION

ODES

Additional POS Data Formatting

Scale Options

The following codes

do not

require that the MS2

0 to be in scale

service mode.

5-Digit Weight

Sets the English Mode weight to 5-digits, as
in xx.yyy pounds.

In order to work properly, this bar code must
be scanned AFTER scanning one of the
English configuration bar codes found on
pages 27 - 36.

No Scale

Scan the

No Scale bar

code:

1. If no scale is installed and one of the

single cable protocol bar codes found
on pages 27 - 36 has already been
scanned.

2. If the scale is in a dual cable

environment and one of the single cable
protocol bar codes found on
pages 27 - 36 has already been
scanned.

Summary of Contents for Stratos MS2x20 Series





























































































Search results

Summary of Contents for Stratos MS2x20 Series

Reviews:

Related manuals for Stratos MS2x20 Series

Brands by name

Popular brands

Metrologic Stratos MS2x20 Series, Configuration Addendum

Search results

Summary of Contents for Stratos MS2x20 Series

Reviews:

Related manuals for Stratos MS2x20 Series

Brands by name

Popular brands