manualshive.com logo in svg

Metrohm Titrino 784 KFP, Instructions For Use Manual

Share
Download
Metrohm Titrino 784 KFP Instructions For Use Manual Download Page 16

2.4 Configuration, key <CONFIG>

784 KFP Titrino

13

 >curve

 grid:                 ON

 

 frame:                ON

 scaling:            Full

 width                0.5

 length              0.05

curve

The settings are valid for COM1 and COM2.

If you change the printer type, the following settings are

initialized according to the printer.

Grid drawing (ON, OFF)

Frame drawing (ON, OFF)

Type of scaling (Full, Auto)

Full: The scaling goes from the greatest to the smallest

value.

auto: The scaling from tick to tick, e.g. the

smallest/greatest values lie in between the first/last tick.

Width (0.2...1.00)

1 is greatest width. If you set 1, you may loose the label

at the right margin.

Length (0.01...1.00)

Time axis

:

Curve length

0.01

100 cm

0.1

10 cm

0.5 

2 cm

1

1 cm

Summary of Contents for Titrino 784 KFP


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands