MI 2130 VoltScanner
Setting Up the VoltScanner
7
2 Setting Up the VoltScanner
2.1 Installing ScanLink package
•
Close all other running applications, or restart Windows before installing the
ScanLink package.
•
Insert the ScanLink CD-ROM in your drive and run
Setupex.exe
.
•
Select the Destination Directory for the ScanLink package.
•
Click Next to begin the installation.
2.2 Selecting Language
Go to
Config
menu and choose
Language
option. It enables you to select one of the
available languages. You should restart the ScanLink program to apply the selected
language.
2.3 Sending Parameters to the VoltScanner
VoltScanner communicates with your PC via RS232 cable. Plug the RS232 cable into
an available COM port in your PC and into RS232 connector in the VoltScanner and
run the ScanLink.
2.3.1 Selecting a COM Port
With ScanLink program running, go to
Config
menu and choose
COM port
. The
following COM Port Configuration window will open. Choose appropriate COM port and
click OK. Baud Rate for the VoltScanner is by default 9600.
