MD 9273 Leakage Clamp
P
–
Online power measurement
32
•
Editing graphs of recordings
•
Use Master instrument Workspace manager and Memory organizer
NOTE
:
Look for the Voltage monitor
at the bottom right of the Single test screen to distinguish between MD
9273 Adapter tests and Master instrument-originated tests. When the Master instrument tests are selected
the voltage monitor is always present. When adapter tests are selected, it is omitted.
A.3
Single Tests with MD 9273 Adapter
This section describes the intended measurements and recordings supported by MD 9273 when used as a
test adapter. The set of tests may differ for different Metrel Master instrument.
Appendix B
P
–
Online power measurement
Figure B.4: Power test menu
Measurement parameters
There are no parameters to be set.
Connection diagram
Use
Power test
connection scheme from MD 9273 Manual.
Measurement procedure
•
Connect MD 9273 to the item to be tested and set Bluetooth
®
mode.
•
Enter the
Power
function and wait for active Bluetooth
®
communication sign.
•
Start the continuous measurement.
•
Stop the measurement.
•
Save results (optional).
