MD 9260 Clamp Meter
Sicherheit
11
●
Non-Contact EF-Detection: An antenna is located along the top-right end of the clamp jaw,
which detects electric field surrounds energized conductors. It is ideal for tracing live wiring
connections, locating wiring breakage and to distinguish between live or earth connections.
●
Probe-Contact EF-Detection: For more precise indication of live wires, such as distinguishing
between live and ground connections, use the Red (+) test probe for direct contact
measurements.
PC computer interface capabilities
The instrument equips with an optical isolated interface port at the meter back for data
communication. Optional purchase PC interface kit AMD 9250 is required to connect the meter
to the PC computer RS232 or USB ports.
Press and hold the HOLD button while turning the
meter on to enable meter PC-COMM output.
Hold
The hold feature freezes the display for later view. Press the HOLD button momentarily and
release to toggle the hold feature.
5ms CREST-MAX capture mode
Press CREST (HOLD) button for one second or more and release to activate CREST-MAX
capture (Instantaneous Peak-Hold) mode to capture signal peak of voltage or current in
duration as short as 5ms. The LCD “C” & “MAX” turn on. Press again the button momentarily
and release can toggle the combination use of HOLD feature. Press the button for 1 second or
