MD 9260 Clamp Meter
Sicherheit
19
7.
Service
The life span of the equipment is 7 years. If the equipment should not work properly, before
the service, test the battery conditions, the test leads, etc., and change them if necessary.
If the equipment still does not work check if your operating procedure agrees with the latter
described in this manual.
In the event of returning the equipment it must be re-sent to the after-sales service of the
local Metrel distributor, the outward transport is payable by customer. The delivery must be
agreed in advance with consignee. For delivery indicate, by means of an enclosed note, as clear
as possible, the reasons for returning it. Use only the original packing. Any damage caused by
delivery with NO original packing will be charged in any case to the consignor.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE. METREL WILL NOT
BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
PRINTED ON RECYCLABLE PAPER, PLEASE RECYCLE
