9
3. Measuring
In this part you learn how to quickly measure a pressure, temperature or vacuum:
1. Turn the device ON, slide to the right on the shortcut buttons (during min 1 s).
3. Place the sensors (temperature, pressure, vacuum) on the system and turn them on by
pressing at least for 2 seconds on the button.
4. Observe the measured values.
2. You will see the ‘All Sensors’ screen.
In chapter ‘4. ACR’ the following applications are treated:
- Creating a new ACR system
- Choosing an existing ACR system
- Diagnosis
- Logging
- Measurement report
- Intervention report
- Pressure Decay Test
- Vacuum Decay Test
- Follow-up on Metreco & PC
- Using the hoses & connectors
- Sensor calibration & firmware updates
