19
12. Select ‘Refrigerant Recovered’ and enter
the quantity.
13. Select ‘Refrigerant Charged’ and enter the
quantity.
14. Scroll downwards.
15. Select ‘Oil test’ and enter the result.
9. Select ‘Pressure Decay Test’.
10. Choose manual input or an existing report
(see ‘4.4. Tests’). When choosing manual in-
put, enter the measured value OR take a live
read-out from your vacuum sensor, if placed
on the installation and assigned in Metreco.
11. Select the used gas (N2 or N2+H2)
17. Select ‘Moisture test’ and enter the result.
19. Select ‘Notes’ and add remarks.
16. Select ‘Acid test’ and enter the result.
20. Example of an Intervention Report on
Metreco (for use on PC see4.4.).
- Not all data has to be entered to create an Intervention Report.
- You will find more explanations on the use of Reports on PC in the next chapter (4.5.).
- Recalling an Intervention Report is similar to recalling a Measurement Report (4.3.).
18. Select ‘Start/End’ and complete.
