Metos Gastro Twin, User Manual

Page: 20 / 28

25.05.2012 METOS Hotmix Pro Gastro
20
after flashing the second two lines are to indicate the minutes: with the same procedure you store the
minutes.
Then, you must set the time you want the appliance get started, and with the same system you set the
hour .
Once you confirm the information with the START / STOP button, the display will show the clock icon,
which means that we must set (again with the ”+” and ”-”) the time that we want the machine starts
working; it must be confirmed by pressing ”start / stop” as well.
Next, the display shows the icon of the thermometer, if you want a temperature, always set with the ”+”
and ”-” the temperature, and pressing the ”start / stop” to confirm. If you do not want any temperature
press the ”start stop” button and skip this step.
Now the blades’ icon appears on display, and as above, adjust the speed with the ”+” and ”-”, and store
the data. If you want a speed pulse, press the ”pulse” button before storing the data.
Once you set the last value of speed, you will hear 4 beeps, the machine is put on standby, the display
shows the current time and the clock icon is flashing.
In this condition the machine waits for the set time to perform the set functions.
Speeds will be set only up to 3, the temperature will be up to 95 ° and the time up to 4 hours.
COMPLETE RECIPE IN MEMORY:
Once selected a recipe that you want to perform with the delayed start, press and hold for 5 seconds the
”clock” button and you will then hear 3 beeps.
Now the display shows ”- -: - -” with the first two lines that are flashing, they indicate the hour, with the
”” and ”-” you could just set the time format 0-24.
Once you have chosen the time, you have to store your data by pressing the button ”start / stop”: after
flashing the second two lines indicate the minutes to the same procedure time you store the minutes.
Then, you must set the time when you want the appliance will get started, with the same system with
which he had set the hour earlier.
Once you set the last value, you will hear 4 beeps, the machine is put on standby, the display shows the
current time and the clock icon is flashing.
In this condition the machine waits for the set time to perform the set function.
In this case, the first step of the recipe selection starts, then once finished the machine stops and waits
for the start for the next step.
CAUTION: Always check that the ingredients are introduced in the recommended amount from the
display.
WARNING: Failure to maintain the quantity of food could cause serious damage to things and people.
CAUTION: Never leave your appliance unattended during the operations.
7.7.4. SINGLE STEP OF A RECIPE
When you pick a recipe of which you want to make a single step with the delayed start, first you need to
do the above steps in the ordinary way, then once the the last step is over, and before you give the start
to the next step, press and hold for 5 seconds the ”clock” button and you will hear 3 beeps.
Now the display shows ”- -: - -” with the first two lines that are flashing, they indicate the hour, with the
”+” and ”-” you could just set the time format 0-24 .
Once you have chosen the time, you have to store your data by pressing the button ”start / stop”: after
flashing the second two lines indicate the minutes: with the same procedure for storing the hours, you
now store the minutes.
Then, you must set the time at which you want the appliance getting started, with the same system by
which you had set the hour earlier.
In this case, the step part of the recipe choice starts. At the end of it, the machine stops and waits for
the start for the next step, or it beeps while the recipe has been completed.