Metos Gastro Twin, User Manual

Page: 15 / 28

25.05.2012
METOS Hotmix Pro Gastro
15
7.2. CORRECTION OF DATA SET
When working you can change the parameters of speed, time and temperature and, with the “+” and
“-” symbols, define the new values.
Proceed as follows:
• Press the START / STOP button to stop the appliance
• Press the button corresponding to the parameter that you want to change the setting
• Press the “+” or “-” to set the new value
• Press the START / STOP button to restart the unit.
The unit will not start without any given set of parameters.
7.3. SPEED CONTROL
Selection of the blades’ speed as follows:
• Press the SPEED button
• Use “+” and “-” select the required speed. The speed set will be displayed.
The appliance is equipped with 23 different types of speed:
• Speed from 0 to 10
• Speed from 1 to 10 AUTOPULSE
• Speed 1E for cooking meat with palette
• Speed 1F for cooking delicate foods with pallets
• Turbo
The speed “0” can be displayed and selected only by setting a first temperature, as follows:
• Press the button with the icon of the thermometer
• Select a temperature
• Use “+” and “-” select the speed “0” is shown to
• Set the other parameters and proceed.
7.4. TIME
Selection of time duration:
• Press TIME.
• Use “+” and “-” to select the working time. The value of time set will be displayed.
• The range of time varies from 5 seconds to 4 hours.
• After 60 minutes, and up to 4 hours, the steps will be 10 minutes at a time, unless you use the “+” and
“-” with small shots: in this case we can proceed from minute to minute.
Steps of the clock:
<1min 1-5min. 5-10min. 10-30min. 30 - 60min. > 60min.fino to 4 hours
Every 5 sec. Every 15 sec. Every 30 sec. Every 1 min. Every 5 min. Every 10 min. Every 10 min. with
option of min. in min.
The display shows the remaining time of food preparation.
The unit stops automatically when it reaches the selected time and emits a beep.
If the unit is stopped when the scheduled time is not entirely spent, the flashing icon appears on the
display to indicate that the appliance has a not yet completed default working time.
7.5. TEMPERATURE
Temperature selection:
• Press the TEMPERATURE
• Use “+” and “-” select the required temperature. The display will show the set temperature.
• If you do not set any temperature as the machine has to work “cold”, the display will show two horizon -
tal lines to indicate that there is no heating.
The temperature range varies from 25 °C (77°F) to 190°C (374°F).