meteocontrol Power Control 03082012 - en
45/78
7.2.4
Q(DI)
With this procedure, the reactive power Q is used as the control value.
The DI requirement is provided by the energy supplier as a digital input
signal, e.g. digital ripple control receiver and connected to the digital inputs of
the PCU.
The assignment is carried out via a parameter table. The breakdown and
assignment of the levels are freely selectable. In doing so, every digital PCU
input corresponds to a requirement value.
Feedback is provided via the digital outputs of the PCU.
Fig. 31: Reactive power procedure control Q(DI)
Note:
The areas highlighted in red in the Fig. shown here illustrate
the settings fields relevant for the reactive power procedure
Q(DI).
Input field
Meaning
Reactive power procedures
Indicates the reactive power procedure
Q(DI) selected
