18/78
meteocontrol Power Control 03082012 - en
6.
Power Control config WEB`log
browser
Administrator rights are required to configure the meteocontrol Power Control
in WEB`log.
Login procedure for configuration websites
1.
Select the "Profi page" in the start centre.
2.
Select the "General" menu item.
3.
Select "Login".
4.
Enter the administrator password and click "Login"
(default: ist02)
The WEB`log page for device configuration is displayed in the web
browser,
6.1
Selection of Modbus device profiles
Both the power control unit (PCU) and the power quality analyser (PQA) are
connected to the WEB`log via the Modbus protocol.
To this end, the required device types from the list of available devices must
be selected and saved.
Under the "Admin Measurement" menu item, "General configuration" item,
the required Modbus settings and Modbus device types are selected.
Fig. 4: Selection of the Modbus settings and Modbus device types
